Home
Sample Parts
Inquiries

Machine Specs

HS-1, HS-1R, HS-1RP Specifications
Travels HS-1 HS-1R HS-1RP
X 24"
610 mm
24"
610 mm
24"
610 mm
Y 20"
508 mm
20"
508 mm
20"
508 mm
Z 22"
559 mm
22"
559 mm
22"
559 mm
A 99,999.000 99,999.000
Table HS-1 HS-1R HS-1RP
Width 26"
660 mm


Length 14"
356 mm


T-Slot Width 0.625"
16 mm


T-Slot
Center Distance
4.92"
125 mm


Max Weight
on Table
1,500 lb
280 kg


4th Axis HS-1 HS-1R HS-1RP
Platter Diameter 11.875"
302 mm

Drive System Servo Servo
Minimum Resolution 0.001 0.001

Rotational
Torque
(continuous)


300 ft-lb
407 Nm
300 ft-lb
407 Nm
Brake Torque
1,000 ft-lb
1,356 Nm
1,000 ft-lb
1,356 Nm
Backlash 30 arc-sec 30 arc-sec

Indexing
Accuracy

15 arc-sec 15 arc-sec
Repeatability 10 arc-sec 10 arc-sec
Motor
5.0 hp
3.73 kW
5.0 hp
3.73 kW
Gear Ratio 72:1 72:1
Pulley Ratio 3:1 3:1

Max Weight
on Platter


800 lb*
363 kg
-
-
   * Rapids and cutting feedrates should be reduced at maximum weight.
Spindle HS-1 HS-1R HS-1RP
Taper Size #40 Taper #40 Taper #40 Taper
Speed 8,000 rpm standard
15,000 rpm optional
8,000 rpm standard
15,000 rpm optional
8,000 rpm standard
15,000 rpm optional
Drive System Vector Dual Drive
Belt Drive
Vector Dual Drive
Belt Drive
Vector Dual Drive
Belt Drive
Max Torque @ rpm 140 ft-lb @ 1,000
190 Nm @ 1,000
140 ft-lb @ 1,000
190 Nm @ 1,000
140 ft-lb @ 1,000
190 Nm @ 1,000
Bearings ABEC Class 7 ABEC Class 7 ABEC Class 7
Bearing Lubrication Air/Oil Injection Air/Oil Injection Air/Oil Injection
Cooling Air Cooled Air Cooled Air Cooled
Pallet Changer HS-1 HS-1R HS-1RP
Pallet Size

16" x 16"
406 x 406 mm
Max Weight
on Each Pallet


500 lb
227 kg
Pallet Change Time 25 sec

Maximum weight differential on the HS-1RP is 500 lb.

Tool Changer HS-1 HS-1R HS-1RP
Capacity 24 24 60/20 (optional)
Type CT-40 or BT-40 CT-40 or BT-40 CT-40 or BT-40
Pull Stud
(JMTBA Standard)
MAS P40T-1  45 MAS P40T-1  45 MAS P40T-1  45
Max Tool Diameter 3.5"
89 mm
3.5"
89 mm
3.5"
89 mm
Max Tool Weight 12 lb
6 kg
12 lb
6 kg
12 lb
6 kg

Change Time
(avg)
Tool to Tool

8.0 sec 8.0 sec 1.8 sec

Change Time
(avg)
Chip to Chip

10.0 sec 10.0 sec 6.0 sec
Accuracy HS-1 HS-1R HS-1RP
Positioning 0.0002"
0.0051 mm
0.0002"
0.0051 mm
0.0002"
0.0051 mm
Repeatability 0.0001"
0.0025 mm
0.0001"
0.0025 mm
0.0001"
0.0025 mm
Feedrates HS-1 HS-1R HS-1RP
Rapid 710 ipm
18 m/min
710 ipm
18 m/min
710 ipm
18 m/min
Max Cutting 500 ipm
12.7 m/min
500 ipm
12.7 m/min
500 ipm
12.7 m/min
Motors HS-1 HS-1R HS-1RP
Spindle Motor
(Max Rating)
30 hp
22.4 kW
30 hp
22.4 kW
30 hp
22.4 kW

Axis Motors
(Max Rating)

5.0 hp
3.73 kW
5.0 hp
3.73 kW
5.0 hp
3.73 kW

Axis Motors
(Max Thrust Rating)

3,400 lb
15,120 N
3,400 lb
15,120 N
3,400 lb
15,120 N
General HS-1 HS-1R HS-1RP
Machine Weight 14,000 lb
6,350 kg
14,000 lb
6,350 kg
16,000 lb
7,258 kg
Door Opening Width, Front 26.5"
673 mm
26.5"
673 mm
34.5"
876 mm
Door Opening Width, Side 31.5"
800 mm
31.5"
800 mm
31.5"
800 mm

Enclosure
Material

Powder Coated
14 GA Cold

Rolled Steel

Powder Coated
14 GA Cold

Rolled Steel

Powder Coated
14 GA Cold

Rolled Steel

Window Material Polycarbonate Polycarbonate Polycarbonate
Coolant Flow Rate 10 gpm
38 lpm
10 gpm
38 lpm
10 gpm
38 lpm
Coolant Capacity 80 gal
303 l
80 gal
303 l
80 gal
303 l
Air Required (min) 4 scfm, 100 psi
113 lpm, 6.9 bar
4 scfm, 100 psi
113 lpm, 6.9 bar
4 scfm, 100 psi
113 lpm, 6.9 bar
Power Required 40 amps (FLA)
200-250 VAC
3 Phase, 14 kVA
40 amps (FLA)
200-250 VAC
3 Phase, 14 kVA
40 amps (FLA)
200-250 VAC
3 Phase, 14 kVA
NOTE: FLA/kVA requirements determined by motor horsepower. Check with a Haas distributor for various requirements. Differing VAC/kVA options available. Specifications subject to change.


For more information or questions, please call Toll Free (800)392-3602 or contact sales@psiautomation.com.


Contact PSI

        Automation for all your vane air motor needs. vert-line.gif (547 bytes)    2113 Seabrook Circle
  Seabrook, Texas 77586
  Tel: (281)280-8793
  Fax: (281)280-8795
Start Date: End Date: : Account Administration Update User Info Change Password Manage IPs View HTML Code View/Modify PPC Campaigns WCT Code Check : Other Links Logout Date Range: 09/12/2007 - 09/19/2007 Webclicktracker HTML Code Below is the WCT HTML code and Javascript file. Follow the next few steps to install it on your site. 1. Cut and paste the below code into all HTML pages you wish to track. A good spot for WCT code is just before the closing tag: 2. Download the "wct.js" from the link below and place it in the root directory of your website 3. (optional) If you require SSL, then edit the "wct.js" and set the "ssl = 0" option to "ssl = 1". Also, change "http://" to "https://" in the code below prior to inserting it on your site.